How to Install Versetta Stone

Back

Versetta Stone offers the best of both worlds: The beautiful, timeless look of stone along with panelized installation that’s within reach of nearly any contractor or experienced DIYer.

Much like a traditional siding panel, Versetta Stone siding features an integrated nailing flange so it can simply be nailed or screwed into the wall. And unlike regular stone, there’s no need for mortar, scratch coat, or metal lath.

How easy is it to install Versetta Stone? It breaks down into the basic steps below:

  1. Gather your tools: You’ll need a hammer or screw gun, a circular saw, hand grinder, level, chalk line and tape measure, tin snips, brush, small screwdriver, masonry chisel, and a chop saw with continuous diamond turbo blade. You’ll also want to wear safety glasses or goggles, an N-95 mask, gloves, ear plugs or muffs, steel toe boots, and a hard hat.
  2. Estimate materials: Using provided formulas, calculate the area to be covered and how many panels are needed, along with corners, starter strips, and fasteners.
  3. Inspect and prep the area
  4. Mark your starting point and level lines
  5. Install the starter strip and, where needed, J-channel
  6. Install panels:
    • Install panels from the bottom to the top, one row at a time, lapping in a shingle fashion so the tongue seats completely in the groove.
    • Use screws with 3⁄8″ minimum head diameter and ⅛” shank with a length to penetrate the framing at least 1”.
  7. Install universal corners
  8. Install wainscot cap/sill and receptacle/light boxes if needed for the application. Use flashing, metal lath, and adhesive to affix receptable and light boxes.
  9. Clean dust with water and nylon bristle brush

Be sure to follow full manufacturer instructions to install Versetta Stone. For the complete step-by-step guide, download the Versetta Stone Installation Instructions here.

Watch a Versetta
Stone wall installation:

Versetta
Stone comes in three profiles—Ledgestone, a traditional dry-stack look;
Tight-Cut, which features the look of cut-and-fitted stone; and modern Carved
Block, offering the look of split-face stone.

Ready to buy Versetta Stone? Find a retailer here. Have installation questions? Contact our customer service department here.

The post How to Install Versetta Stone appeared first on Boral Master Blog.